The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

Handguard- Dual Road X-Road stock replacement mount kit.

• Open MX Style handguard with universal mount for all types of handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and light weight and offers adequate ventilation points
• The under loop mount allows for independent vertical adjustment of the handguard and lever assembly. 
• Mounts to bar without interference to other clamped controls allowing them to remain in their original positions.
• Tilt adjustable spoiler for optimal hand coverage.
• Quick to assemble spoiler due to the use of 2 self-tapping screws 
• Mounting kit included
• Logo embossed
• 425g including packaging
• 80X120X270cm
• 45% Polypropylene
• 32% Nylon
• 23% Steel

• Open MX Style handguard with universal mount for all types of handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and light weight and offers adequate ventilation points
• The under loop mount allows for independent vertical adjustment of the handguard and lever assembly. 
• Mounts to bar without interference to other clamped controls allowing them to remain in their original positions.
• Tilt adjustable spoiler for optimal hand coverage.
• Quick to assemble spoiler due to the use of 2 self-tapping screws 
• Mounting kit included
• Logo embossed
• 425g including packaging
• 80X120X270cm
• 45% Polypropylene
• 32% Nylon
• 23% Steel

• Open MX Style handguard with universal mount for all types of handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and light weight and offers adequate ventilation points
• The under loop mount allows for independent vertical adjustment of the handguard and lever assembly. 
• Mounts to bar without interference to other clamped controls allowing them to remain in their original positions.
• Tilt adjustable spoiler for optimal hand coverage.
• Quick to assemble spoiler due to the use of 2 self-tapping screws 
• Mounting kit included
• Logo embossed
• 425g including packaging
• 80X120X270cm
• 45% Polypropylene
• 32% Nylon
• 23% Steel

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel.

The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis Multiplo Hand Guards are highly effective hand guards. The solid plastic shields combined with the sturdy frame offer exceptional protection and are extremely resistant thanks to special hardening treatment used for the aluminium. Due to the curved aluminium bar design, it is possible to make a quick lateral hand release from the grip bar in case of an emergency.

- Indexed steel bar-end insert mounts solid and will not allow the guard to rotate in a crash.

- Mounts to the end of the handlebar

- Plenty of room for Cables and Brake Lines

- Universal Mounting Kit Included

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Universal mount kit that allows fitment of Acerbis handguards to 7/8 inch and 1-1/8 inch bars.

Different size shims allow one kit to fit many different handlebars.

Curved off-set design provides plenty of clearance for hydraulic brake and clutch lines.

As used with Acerbis X-Factory handguards.

Aluminum construction.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

Handguard- Dual Road X-Road X-factory additional mount kit.

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.

Replacement mount kit for the Acerbis X-Ultimate handguard.

Replacement dual injected polypropylene shields for the X-Factory Handguards.

Dual Road Handguard Optional LED

Replacement mount kit for the Vented Uniko handguard. This mount kit will fit all handlebars and mounts above the perches/levers.

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement mount kit for the X-Future 24297 handguards.

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair