fullscreen fullscreen_exit done_all launch
MUC-OFF TECHNICAL WASH FOR APPAREL 300ml Protection - Sprays 20812
zoom_inchevron_leftchevron_right
MUC-OFF TECHNICAL WASH FOR APPAREL 300mlMUC-OFF
$24.95
20812

Muc-Off Technical Wash is a wash-in cleaner that safely removes dirt, grime, and odours from your technical gear. The unique, concentrated formula gives your garments a deep but safe clean, whilst protecting any existing DWR treatments and the breathability of the material, so it's perfect for freshening up and extending the life of those shred threads! It can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing.

Features:

  • Gently removes dirt and grime from technical apparel
  • Extends life and performance of garments
  • Can be used on any technical or waterproof/water repellent fabric
  • Can be used in the washing machine or applied by hand
  • Suitable for use in hard and soft water areas
  • Will not impact breathability of garments
  • Biodegradable formula
  • PFC-Free 
  • Not harmful for the environment or to you
  • Safe to use on any garments with an existing DWR treatment
  • Perfect to use as a pre-wash ahead of reproofing your technical apparel with Rain Shield Re-Proofer Spray or Wash-In Rain Shield Re-Proofer

Instructions for Use:

  1. Place garments to be washed into your washing machine.
  2. Shake bottle well to activate the formula.
  3. Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.
  4. Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent.
  5. Wash on a full cycle at 30°C/86°F or according to care label instructions.
  6. Allow garments to air-dry. 
  7. TOP TIP

    If washing water repellent/waterproof garments we'd recommend re-treating with our Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water repellent finish. Follow the directions for use on the bottle for application details.


Frequently Asked Question:

How many washes will I get per 300ml/10.14oz bottle?

If you use the suggested measure of 25ml-0.16oz per wash load you will get 12 washes per bottle.

When should I wash my technical apparel?

All technical apparel, especially waterproof apparel needs regular washing to keep the membranes breathing and performing at their best. If your apparel is starting to wet out or mud and grime is clinging to the surface, then it's time for a wash with our Technical Wash.

What wash temperature should I use when washing my garment?

We'd always recommend following your garment manufacturers care label instructions which will provide you with their recommended wash temperature. For an outdoor technical garment this will usually be 30C-86F or 40C-104F. Muc-Off Technical Wash is formulated to work at any temperature.

MUC-OFF WASH-IN SHIELD RE-PROOFER 300ml Protection - Sprays 20813
zoom_inchevron_leftchevron_right
MUC-OFF WASH-IN SHIELD RE-PROOFER 300mlMUC-OFF
$24.95
20813

Riding in the rain? Grab our new Wash-In Rain Shield Re-Proofer. It's an easy-to-use wash-in treatment designed to restore factory levels of performance on all waterproof and breathable fabrics. The cutting-edge DWR treatment creates a tough barrier to keep your technical garments weatherproof, without impacting their breathability. It also helps to protect against mud and ground-in stains. And the best bit? It's safe for the environment, as it's water-based and doesn't contain PFCs!

Our state-of-the-art formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you're protected to go and get rad in the harshest of conditions.

Features:

  • Extends life and performance of garments
  • Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing
  • Helps to repel wet mud and grime and protects against ground-in stains
  • Will not impact breathability of garments
  • PFC - Free
  • Not harmful for the environment, or to you
  • Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing 

Instructions for Use:

  1. We recommend cleaning your technical apparel with our Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results. 
  2. Shake bottle well to activate the formula.
  3. For best results we recommend reproofing garments separately. 
  4. Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing.
  5. Pour the product directly into the detergent drawer of your washing machine
  6. Wash on a full cycle at 30°C/86°F or according to the care label instructions.
  7. Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits.
  8. TOP TIP - For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash in formula. This will build a secondary water repellent coating on garments used in very harsh/wet conditions.

    N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.


Frequently Asked Question:

How many jackets/ garments can I treat per bottle?

Depending on how much you use the 300ml/10.14oz bottle will treat around 3 garments (XL sized jackets) per bottle. 

How long will the treatment last after application?

The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing.  All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with re-proofer.

Can you use Wash-In Rain Shield Re-Proofer on normal clothes?

The re-proofer will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.

MUC-OFF MOTORCYCLE HELMET FOAM FRESH SANITIZER 400ml Helmet Care 199
zoom_inchevron_leftchevron_right
MUC-OFF MOTORCYCLE HELMET FOAM FRESH SANITIZER 400mlMUC-OFF
$14.95
199

Muc-Off Foam Fresh is a highly effective, easy to use foam cleaner which is ideal for helmet liners or any soft material which comes into contact with the rider. Foam Fresh has an instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh Citric Burst fragrance. Even the cleanest looking riding gear benefits from this uniquely formulated product. 

Its awesome for use on pads, gloves, shoes, liners and body armour.

Features:

- Agitates Dirt

- Fresh Citric Burst Fragrance

- Instant Foaming Action

Instructions for Use:

1. Remove heavily built-up dirt and mud prior to application. 

2. Shake can vigorously and spray foam onto the desired area for cleaning.

3. Allow to soak in for a short time before wiping away excess with a clean, dry, cloth.

MUC-OFF ANTI-ODOUR SPRAY 250ML Personal Care 20507
zoom_inchevron_leftchevron_right
MUC-OFF ANTI-ODOUR SPRAY 250MLMUC-OFF
$22.95
20507

Been shredding so hard that your kit has started to smell? You need Muc-Off Anti-Odour Spray! It's a highly effective, easy to use anti-odour spray that uses SILVERPLUS® silver ion technology.

It's ideal for removing odour caused by bacteria from body armour, shoe lining, gloves, pads or any soft material, synthetic fibre or textile that comes into contact with your skin and starts to smell over time.

Our spray leaves a long-lasting hygienic finish that instantly freshens your equipment. It's perfect for using while travelling, to help protect you and your kit when it's repeatedly used and can't be washed on the go.

Not only will it stop your kit smelling like a skip, but it'll even help it last longer!

Features

  • Triple effect odour remover using SILVERPLUS® silver ion technology
  • Effective against odour caused by bacteria for functional freshness
  • Suitable and safe to use on most riding equipment and textiles (technical, sportswear, socks, shoes, body armour, pads, body armour and gloves made from textile or leather)
  • Suitable to use on leather/suede/cotton/polycotton/softshell/technical fabrics/synthetics*
  • Gentle on fabrics and skin when dry
  • Provides freshness for up to 10 washes
  • Perfect for staying clean and fresh during periods of intense activity such as multi-day bike park sessions, or adventure races when it's harder to wash your kit
  • Easy to use spray on application in a 250ml spray bottle

*Check with equipment manufacturer care instructions before use.

Storage

  • Store in a cool, dry place. Do not freeze or allow to frost. 
  • Use in a well-ventilated area

SAFETY INFORMATION

  • Keep out of reach of children
  • DO NOT USE ON ANY HEADWEAR INCLUDING HELMET LINERS.
  • DANGER: Causes serious eye damage
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. 
  • FIRST AID: after inhalation: Supply fresh air; consult doctor in case of complaints.
  • CONTAINS: Docusate sodium, Ethanol, Silver Chloride
How Too:
  1. Ensure the item you are applying the spray to is clear of heavy mud/soiling before application.
  2. Shake the bottle vigorously before use to activate the formula.
  3. Spray directly onto desired area to neutralise odour. 
  4. Absorb any excess spray with a clean microfibre cloth.
  5. Allow to air dry fully before use.
  6. We recommend leaving for 24 hours drying time before using the item it has been applied to.
  7. Can be reapplied as necessary. As an example, we would recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application.
Frequently Asked Questions

How often should you re-apply the treatment?

we recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application. 

How long will the treatment last after application?

This all depends on usage and climates using your equipment in but overall the treatment provides freshness for up to 10 washes but can be easily applied should items start to smell again due to continual use in warmer climates. Even small SILVERPLUS® quantities are sufficient to permanently control odour-causing bacteria in textiles.

Are there any textiles/fabrics this isn't safe to use on?

Only Polypropylene is more difficult to treat, the fibre surface can be too slippy for the treatment to adhere to.

MUC-OFF RAIN SHIELD RE-PROOFER 250ml Protection - Sprays 20506
zoom_inchevron_leftchevron_right
MUC-OFF RAIN SHIELD RE-PROOFER 250mlMUC-OFF
$21.95
20506

Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.

It is a simple to use 'spray on' waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It's safe for the environment, as it's water-based and doesn't contain PFCs!

Our state-of-the-art 'spray on' formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you're protected to go and get rad in the harshest of conditions.

Features:

  • PFC free, water-based formula 
  • Not harmful for the environment or to you
  • Helps to repel wet mud and grime and protects against ground-in stains
  • Will not impact breathability of garments
  • Extends life and performance of garments
  • Easy to apply, supplied in a spray bottle
  • Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
  • Will treat 1-2 garments per bottle!

Instructions for Use:

  1. Shake bottle well before use to activate the formula.
  2. Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
  3. Remove any excess treatment with a clean cloth.
  4. . Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing garment in wet conditions again.
  5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results

Frequently Asked Question:

How many jackets/garments can I treat per bottle?

Depending on how much you use the 250ml bottle will treat around 2 garments (XL sized jackets) per bottle. 

How long will the treatment last after application?

The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. 

All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer.

Can you use Rain Shield on normal clothes?

The spray will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.

MUC-OFF HELMET VISOR CLEANER 250ML Helmet Care 219
zoom_inchevron_leftchevron_right
MUC-OFF HELMET VISOR CLEANER 250MLMUC-OFF
$18.95
219

Helmet, Visor & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat and oily residue from all helmets, eye wear and goggles. Its been formulated using de-ionised water as recommended by many helmet manufacturers and its safe to use on all lens materials including polycarbonate! 

Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH neutral soaps. And you don't have to worry about the formula either! Its fully biodegradable and contains no solvents or harmful chemicals.

Its perfect for cleaning motorcycle goggles, cycling glasses and goggles as well as snowboard and ski goggles.

Features:

- Formulated using de-ionised water

- pH neutral formula as recommended by helmet manufacturers

- Free from solvents and harmful chemicals

- 100% biodegradable

Instructions for Use:

1. Spray Visor, Lens & Goggle Cleaner onto the surface.

2. Allow formula to soften any hard contaminant particles.

3. Gently wipe with a clean microfibre cloth.

MUC-OFF MOTORCYCLE PREMIUM ANTI-FOG TREATMENT 32ml Helmet Care 214-1
zoom_inchevron_leftchevron_right
MUC-OFF MOTORCYCLE PREMIUM ANTI-FOG TREATMENT 32mlMUC-OFF
$24.95
214-1

Muc-Off Anti-Fog Treatment uses cutting edge moisture absorption technology with an anti-mist formula to create a transparent, micro-thin coating so your ride is never cut short by foggy goggles! Our Anti-Fog Treatment lasts up to five days, and if you spray on the outside of your swim goggles or sports glasses, the anti-mist formula will help rain bead off to make your ride that much safer!

And, with our long-lasting formula, your goggles will be fog free for up to five days!

Features:

- Intensive anti-mist formula

- Advanced moisture absorption

- Lasts up to 5 days

- Safe on all plastics and glass

- Ideal for mx and ski goggles, Snowboard goggles, helmet visors, glasses & car mirrors

- 32ml easy spray bottle

Instructions for Use:

1. Ensure area is clean and contaminant free.

2. Shake bottle to activate formula.

3. Spray a light mist of Anti-Fog Treatment onto the surface and wipe gently with a dry piece of tissue.

MUC-OFF DRY SHOWER 100ml Personal Care 118
zoom_inchevron_leftchevron_right
MUC-OFF DRY SHOWER 100mlMUC-OFF
$11.95
118

Muc-Off Dry Shower is an innovative antibacterial body wash designed for people on the move. Whether youre a cyclist, commuter, lunch time trainer, festival goer, camper, backpacker, trail runner, motorcyclist or just an all around active person. Dry Shower is the perfect way to freshen up without water!

Specifically formulated to kill odour causing bacteria and germs with its gentle yet effective, coconut derived cleaning ingredients, Dry Shower leaves you feeling (and smelling) fresh and clean. Weve even made sure Dry Shower is safe to use by creating a formula thats free from Parabens and Formaldehyde.

With Dry Showers foaming action simply apply and rub in with your hands, then leave to dry or wipe off with a towel.

Dry Shower is suitable for Vegans and is cruelty free.

Features:

- Formulated with coconut

- Kills odour causing germs and bacteria

- No water or towel needed

- Paraben and Formaldehyde free

- Kills 99.9% Germs

MUC-OFF MOTORCYCLE HELMET GOGGLE VISOR CLEANER 32ml Helmet Care 212
zoom_inchevron_leftchevron_right
MUC-OFF MOTORCYCLE HELMET GOGGLE VISOR CLEANER 32mlMUC-OFF
$9.96
212

Helmet, Visor & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat and oily residue from all helmets, eye wear and goggles. Its been formulated using de-ionised water as recommended by many helmet manufacturers and its safe to use on all lens materials including polycarbonate! 

Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH neutral soaps. And you don't have to worry about the formula either! Its fully biodegradable and contains no solvents or harmful chemicals.

Its perfect for cleaning motorcycle goggles, cycling glasses and goggles as well as snowboard and ski goggles.

Features:

- Formulated using de-ionised water

- pH neutral formula as recommended by helmet manufacturers

- Free from solvents and harmful chemicals

- 100% biodegradable

Instructions for Use:

1. Spray Visor, Lens & Goggle Cleaner onto the surface.

2. Allow formula to soften any hard contaminant particles.

3. Gently wipe with a clean microfibre cloth.