The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• DIRECT FIT TO HONDA AFRICA TWIN
• Innovative design for improved aerodynamic efficiency.
• Extendable upper cover for maximum protection from the air, useful for use at low temperatures
• Extensible bottom cover that directs the flow of air to the hands for maximum aeration.
• Closed handguard with quick attachment to the handlebar
• Steel bar overmolded with plastic in different colors
• Metal mounting kit to reduce vibrations, designed for mounting many on / off road and naked motorcycles. (there are various optional kits for application on motorcycles that require dedicated assemblies, see application)

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel