Acerbis is constantly trying to improve its product, and the Vented Uniko Hand Guard is a testament to this fact. After feedback from their professional riders, Acerbis realised there was demand for a vented version of the popular Uniko Hand Guard. In response to that demand, Acerbis brought the Vented Uniko to market. This hand guard features a large venting pattern strategically positioned to direct air flow past the levers. In addition, the improved universal mounting system allows the guards to be positioned independent of the angle of the levers.

- The Vented Uniko features a large vent to direct airflow past the levers.

- Lightweight Polypropylene construction for maximum performance and durability.

- The included universal mount kit allows the guards to be positioned independent of the angle of the levers.

- Universal mounting brackets suitable for all MX bikes.

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Replacement dual injected polypropylene shields for the X-Factory Handguards.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.

Acerbis is constantly trying to improve its product, and the Vented Uniko Hand Guard is a testament to this fact. After feedback from their professional riders, Acerbis realised there was demand for a vented version of the popular Uniko Hand Guard. In response to that demand, Acerbis brought the Vented Uniko to market. This hand guard features a large venting pattern strategically positioned to direct air flow past the levers. In addition, the improved universal mounting system allows the guards to be positioned independent of the angle of the levers.

- The Vented Uniko features a large vent to direct airflow past the levers.

- Lightweight Polypropylene construction for maximum performance and durability.

- The included universal mount kit allows the guards to be positioned independent of the angle of the levers.

- Universal mounting brackets suitable for all MX bikes.

Open hand guard with universal mounting kit

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

Replacement dual injected polypropylene shields for the X-Factory Handguards.

Replacement dual injected polypropylene shields for the X-Factor Handguards.

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel.

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.

The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

Replacement dual injected polypropylene shields for the X-Factory Handguards.

Replacement dual injected polypropylene shields for the X-Factory Handguards.

Replacement Bars for the X-Factory Handguards.

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.