Fits:
Generic Conventional Forks
Physical Features
Wire Length 1450mm
Fits:
Generic Inverted Forks All Years
Physical Features
Wire Length 1450mm
(57%u201D)
Voyager/Vapor Ignition Sensor 2550mm Length (100").
Type
Voyager & Vapor ignition Sensor
Physical Features
Wire Length 1800mm
(70.87%u201D)
Magnet Kit: Yamaha ATV Z400 KFX400 Rhino.
Voyager/Vapor/Endurance II Power Connection 1220mm (4in).
Type
Voyager Power Lead
Physical Features
Wire Length 1220mm
Speed sensor cable extension 600mm (24") long.
Type
Extension for Speedometer Cable Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Temperature sensor extension lead 600mm (24") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 10mm
Temperature Sensor: Cylinder Head 14mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 14mm
Temperature Sensor: 22mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 22mm (0.87")
Temperature Sensor: 25mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 25mm (0.98")
Temperature Sensor: Radiator Fin, 7mm Wide, 550mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freeride and Honda radiators
-Easy install
-Great sensor for Voyager, Vapor, Striker and TTO gauges.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 550mm
(21%u201D)
Width 7mm
Temperature Sensor: 16mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 550mm
Diameter 16mm (.063")
Temperature Sensor: Radiator Fin, 8mm Wide, 180mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freerides and Honda radiators
-Easy install
-Short Fin Sensor can be used on the 732-FN6 fan kit.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 180mm
(7%u201D)
Diameter 8mm
AC Wall Charger for Voyager and Voyager Pro.
Used when Voyager will not be charged by the vehicle electrical system. Bikes without electric starts or headlight may require it. (Not included in Voyager kits)
Replacement Gauge Only.
Features Description
Temp Sensor -40°C/F - 300°C/575°F
Power Description
Power Requirements 12V DC Only
Physical Features Description
Physical Dimensions
Screen Size 23.7x13.6mm (.93x.53in)
Temperature Sensor: Radiator Fin, 7mm Wide, 180mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freerides and Honda radiators
-Easy install
-Short Fin Sensor can be used on the 732-FN9 fan kit.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 180mm
(7%u201D)
Diameter 7mm
Temperature Sensor: Radiator Fin, 8mm Wide, 550mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freeride and Honda radiators
-Easy install
-Great sensor for Voyager, Vapor, Striker and TTO gauges.
Engineered for durability. Upgrade the standard Voyager Pro dock with this premium aluminum replacement. The EXTREME ALUMINUM DOCK is machined from billet aluminum, with additional enhancements for water diversion, positive thumbscrew lock and mechanically improved pins. Hard mount with quick removal of the Voyager Pro GPS.
Made to hold up even on the roughest trails.
Temperature sensor extension lead 1800mm (72") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1800mm
(72%u201D)
The Voyager Pro dock hard-mounts to the vehicle and allows quick removal of Voyager Pro.
Voyager Pro snaps on, is released by the large button on top, and can be locked using the Allen key.
Vehicle sensors plug into the back with waterproof white JST connectors.
The V2V antenna screws into the port on the back.
The black rubber guard is magnetic and protects the brass pins while Voyager Pro is removed.
Attaches to vehicles using the AMPs hole pattern. Compatible with Trail Tech mounting hardware and RAM brand mounts.
Included in Voyager Pro kits
Temperature sensor extension lead 1200mm (48") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1200mm
(48%u201D)
Temperature Sensor: Cylinder Head 12mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 12mm
Fits:
KTM 08-10 ATV XC/SX 450/505/525
Honda Rancher (4WD)
Yamaha All Years TW200
Yamaha 87-09 Banshee
Yamaha 87-06 Blaster
Yamaha 08-15 Grizzly 450/700
Yamaha 05-15 Raptor 250/250R/350
Yamaha 01-05 Raptor 660
Yamaha 06-15 Raptor 700
Yamaha 85-04 Warrior
Yamaha 95-10 Wolverine
Yamaha 04-14 YFZ450
Yamaha 09-15 YFZ450R/X
Yamaha 04-08 Rhino UTV
Suzuki All Years LT-Z 400
Suzuki 06-09 LT-R 450
Kawasaki 02-08 KFX 400
Kawasaki 08-15 Teryz UTV
Polaris 06-12 Outlaw 450/500/525
Polaris 03-08 Predator
Polaris All Years Trailblazer (2WD)
Polaris All Years Trail Boss
Polaris 14-15 Scrambler 850
Polaris 08-15 Ranger RZR/RZRS/RZR4/RZR 800/900/1000 UTV
Bombardier 00-08 DS 650
Artic Cat 13-15 Wildcat 1000
Drum Brakes
CAN AM 08-13 DS 450
Physical Features
Wire Length 1350mm
(53%u201D)
Temperature Sensor: 1/8th x 28 BSPP Probe Sensor Extra Long.
Type
Engine Temperature Water Cooled Machines
Threaded Probe Sensor
Physical Features
Wire Length 900mm
(35%u201D)
Thread Diameter and Pitch 1/8 - 28th BSPP
Voyager Pro plastic handlebar mounting hardware kit for 7/8 and 1-1/8 bars.
Included in Voyager Pro kits.
Patented mount design has two points of articulation, enabling a wide variety of mounting positions.
Made from special high strength materials to withstand the rigors of powersports.
Includes screws and bolts to attach a Voyager Pro dock.
Comes with four M4x14mm screws to attach the Voyager Pro dock.
Included in Voyager Pro kits.
Voyager Pro GPS unit not included.
Temperature Sensor: Radiator Fin, 10mm Wide, 550mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM, Beta, Gas Gas, Husaberg, Husqvarna radiators
-Easy install
-Great sensor for Voyager, Vapor, Striker and TTO gauges.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 550mm
(21%u201D)
Width 10mm
Voyager/Vapor Ignition Sensor 1800mm Length (70.87in).
Type
Voyager ignition Sensors
Physical Features
Wire Length 1800mm
Temperature Sensor: 19mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 19mm (0.75")
Off Road Imports © 2024