This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Acerbis off-road skid plates provide protection for the engine cases and frame rails. The extended coverage of the off-road version provides additional protection to the ignition cover and the water pump area on most applications. Key features and benefits of

Snug fit prevents mud/dirt/rock/debris from building up between the skid plate and the motor.

Less expensive than many other aluminium and carbon fibre units.

Much quieter than aluminium skid plates; does not vibrate during idle or resonate after a rock ding.

Does not affect frame rigidity/flex.

Allows engine to run cooler.

Constructed of lightweight polypropylene.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Acerbis off-road skid plates provide protection for the engine cases and frame rails. The extended coverage of the off-road version provides additional protection to the ignition cover and the water pump area on most applications. Key features and benefits of

Snug fit prevents mud/dirt/rock/debris from building up between the skid plate and the motor.

Less expensive than many other aluminium and carbon fibre units.

Much quieter than aluminium skid plates; does not vibrate during idle or resonate after a rock ding.

Does not affect frame rigidity/flex.

Allows engine to run cooler.

Constructed of lightweight polypropylene.

• Latest generation skid plate with integrated fin
• Fin designed to protect the linkage of the shock from impacts, mud and sand. It allows you to easily slide over natural obstacles (Whoops, stones, logs) ensuring a smooth ride. The design ensures maximum adherence to the link
• It offers maximum protection to the chassis and motor.
• Extended protection areas on the side housings, on the water pump and in the chassis areas
• Presence of exhaust areas to give more lightness, ventilation and facilitate the washing operations inside the skid plate
• Design designed to reduce the ingress of mud and debris
• Protection of the side housings, on the water pump and in the areas of the chassis
• Easily mounts thanks the front holes and the original rear seats, with the addition of an additional support guaranteed by two plastic hooks
• Two-tone label with logo

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.