The Trophy 19 seat cover is produced with the best technologies on the market.

The Trophy Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The Trophy Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Acerbis Chain Guides are the gold standard in drive components and purpose built to give you great wear characteristics and quiet operation.

Designed to fit inside your OEM guide housing, Acerbis creates their Guides from Proprietary Injection Moulded Polyurethane to keep your Chain gliding like its on ice.

- Replacement Chain Guide Rub Block.

- Uses all OEM Mounts and Hardware.

- Fits inside your Stock Chain Guide Housing.

- Injection Moulded Polyurethane.

- Quiet Operation and Extended Chain Life.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

CONSTRUCTION AND DESIGN:

• Increased tank 23L / 6.1 Gallons.
• Impact and abrasion resistant.
• Lighter than the original in steel.
• Ideal for both tourism and competition.
• Designed to maintain a narrow profile to ensure excellent driveability.
• Compatible with tubular engine guards / fairings.
• Perfectly compatible with the original pump and level switch
• Possibility to assemble Quick Fill cap
• E800033Z approved for use on EU road
• Compatible with E5 E10 petrol

In the tank is included:

• Acerbis cap
• Vent pipe
• Assembly kit

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

Mefo Mousse is designed and manufactured exclusively in Germany to exacting standards. We guarantee a higher quality product compare to other mousse on the market and we have sizes compatible with almost every tyre brand and size.

Enables more grip and traction

Better feel and ridability

Longer Tyre Life

Mefo Mousse has been used to win almost every major off road event in Australia including Finke Desert Race, Hattah Desert Race, Australian 4-Day and the Australian Off Road Championship.

Replacement dual injected polypropylene shields for the X-Factory Handguards.

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

15mm higher than standard seat foam.

Firmer material then original seat foams.

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

Standard height seat foam.

Firmer material then original seat foams.

Acerbis off-road skid plates provide protection for the engine cases and frame rails. The extended coverage of the off-road version provides additional protection to the ignition cover and the water pump area on most applications. Key features and benefits of

• Last generation skid plate with built-in fin
• Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks)  Its design ensures the best cover around the link, thus guaranteeing a clean ride
• Plastic 6mm thick for the best frame and engine protection
• Protection areas extended over the engine covers, on the water pump and on the foot peg mounts
• Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate
• Design developed to reduce the presence of mud and debris around the engine
• Possibility to combine its use with Acerbis X-POWER (clutch and ignition cover protection)
• Carbon look refinishing
• Easy mounting on the original fastenings of the bike

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

Standard height seat foam.

Firmer material then original seat foams.

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

Endurance II Replacement Head Unit - Black

Head Unit Only (No Sensors)

Replacement dual injected polypropylene shields for the X-Factory Handguards.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

Complete Kite KTM rear hub conversion kit for 2023 KTM SX SXF 

For a better technical conversion of 03-22 rear Kite KTM hubs to fit 2023 KTM SX SXF bikes, offering better stiffness in the rear wheel compared to using only the external spacer option. 

Kit comes complete with all bearing, seals, internal spacer, external spacers, centre washer and circlip. 

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fits perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

15mm Higher then standard seat foam.

Firmer material then original seat foams.

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

Replacement dual injected polypropylene shields for the X-Factory Handguards.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fits perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

Standard height seat foam.

Firmer material then original seat foams.

Kite Parts Flex Levers

Lever shape designed for maximum ergonomic comfort

Aircraft grade aluminium

Made from billet using CNC machining

Strong and durable flex mechanism

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

Replacement dual injected polypropylene shields for the X-Factory Handguards.

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two swingarm are included. One for the left side and another for the right.

Pre-cut for perfect fit to the original swingarm of the bike