Italian made Alpina aluminium nipples.

Anodised aluminium

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Pack of 3 pieces with the number 0 in Black

Dimensions 13x7 cm approximately

Made in thin material designed to fit two digits per number plate.

Italian made Alpina aluminium nipples.

Anodised aluminium

Acerbis has introduced an innovative silencer protector. These protective covers are specifically designed to protect your exhaust in the event of a tip over and also help to reduce vibration common in exhaust systems. The flexible rubber material is heat resistant and is easily installed with included zip closures.

- Silencer protects against bumps

- Circumference of silencer is 200/400 mm

- Locking system through micro metric closing bands.

- Available in a variety of colours

Domino Motocross Enduro Half Waffle Grips

Material: Thermoplastic rubber

Length: 118

Open End: NO

Made in Italy

Half waffle design

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

Italian made Alpina aluminium nipples.

Anodised aluminium

Italian made Alpina aluminium nipples.

Anodised aluminium

Italian made Alpina aluminium nipples.

Anodised aluminium

Made of highly resistant thermoplastic to protect the most exposed part of the shock absorber link from impacts and scraping on stones, tree trunks and obstacles.

Allows the motorbike to slide over tree trunks, boulders and earth obstacles.

Assembly is quick and easy using a screw, which ensures protection in position despite the severest impacts with rough terrain.

Resistant and light

Nylon 95%, Others 5%

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Italian made Alpina aluminium nipples.

Anodised aluminium

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Blackbird Racing Decal Sheets are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Suitable to be applied on plastics or frame of the bike for extra grip while riding.

Easy to cut and adaptable to various surfaces.

The kit is composed of three sheets size 33x10 cm

Colour - Black

Surface - Non-Slip

Italian made Alpina aluminium nipples.

Anodised aluminium

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Need a little more room to take some extra tools and gear on your next ride? The Acerbis front fender tool bag is the perfect solution with easy to instal straps and a simple yet durable design.

95% polyester; 5% Other

Capacity: 2 litres.

Compact tool bag (Tools are NOT included)

Fast locking system to the front fender with 4 metallic hooks

Closure with adjustable straps

Rubber base for a better grip

Wide internal tools pocket

Clear internal pocket for bushings

Italian made Alpina aluminium nipples.

Anodised aluminium

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Pack of 3 pieces with the number 0 in White

Dimensions 13x7 cm approximately

Made in thin material designed to fit two digits per number plate.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

Italian made Alpina aluminium nipples.

Anodised aluminium

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Italian made Alpina aluminium nipples.

Anodised aluminium

Domino A450 Road Racing Grips

Thermoplastic dual compound rubber grips with multiconic finish

Colour: Anthracite/Black
Diameter Handlebars/Throttle Tubes: 22/26 mm
Diameter installed grips: 31,5 mm
Flange diameter: 47 mm
Grip end: Open
Length: 120 mm/125 mm
Material: Two-component thermoplastic rubber
Slot for Iron Wire: 2-3 slots

Sold as a pair

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

12 x Italian made Alpina galvanic treatment zinc plated carbon steel spokes. High resistance and minimum weight.

12 x Italian made Alpina aluminium nipples.

Kite Parts Sports Brake Pads

Sintered compound designed for off road motorcycles.

Provides modular and powerful braking.

Recommended for off road endure trail use.

Protect your shock from dirt and debris.

Universal fitment.

Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two fork decals are included. One for the left fork and another for the right fork.

Size 22x17 cm each

Designed to protect the upper part of USD forks.

Clear finish

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.