Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring
unrivalled fitment to your motorcycle. Made and Moulded in Italy with high
grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator
Shrouds, Side Panels, Air Box Panel, Rear Fender.
·
Re-Styled Front Fender to reduce weight and mud build up.
·
Radiator Shrouds feature an all over smooth
finish allowing for easy application of Graphics & Decals.
·
Highly Resistant Plastic, Quality Constructed.
·
Prevents Cracking, Fading and Chalking.
·
Made In Italy
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Rear Fender.
· Re-Styled Front Fender to reduce weight and mud build up.
· Radiator Shrouds feature an all over smooth finish allowing for easy application of Graphics & Decals.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
The Trail Tech UNIVERSAL TEMP METER senses temperature on motorcycles, UTVs, ATVs, SNOW Machines, and other applications where a minimal footprint, watertight integrity, and durability are desired.
The included radiator fin and cylinder head sensor assortment allow for the best option based on your application. After removing a sensor from the included array, they can be installed by pressing a radiator fin sensor between the fins of a radiator or replacing a spark plug crush washer with a cylinder head sensor. You can even capture ambient air temp by leaving the sensor wire exposed to the open air. This UNIVERSAL TEMP METER is primarily designed for motor vehicles use, but it is also well suited for DIY applications such as greenhouses, refrigerators, and computers.
If you need TEMP monitoring, then you need this UNIVERSAL TEMP METER!
DISPLAY: Displays ºF/ºC temperature for whatever the copper sensor is attached to. Monitor the max temperature reached and press the front button to see the time-of-day clock.
INCLUDED SENSOR CARD: Choice of 6 sensor heads included in the kit. Remove chosen head from the card, then fasten it to the sensor wire with a screw. It is possible to work with homemade DIY copper heads for various uses.
For best performance, use the provided copper sensors.
SENSOR CHOICES: Vehicle coolant sensor heads press into radiator fins (7, 8, and 10mm), or choose an engine ring sensor that replaces a head bolt or spark plug crush washer (10, 12, and 14mm).
BEST USE: Great for monitoring the temperature of UTVs, street, adventure, and off-road motorcycles.
Works great on other vehicles like farm equipment. Use this meter wherever you need to monitor the temperature on your application.
INSTALL: Comes with VHB tape for a quick head unit install or mechanically fastens with M4 (#6) bolts (not included).
BATTERY: The internal battery is NOT replaceable! Ultra-low power design of the product ensures a lifetime of 5+ years. Complete epoxy encapsulation provides the best weather and anti-vibration resistance for the harshest applications.
Full Complete Plastic Kit to suit KTM SX/SXF 2023-2024
Renew your Ride with iPlastix. Quality construction, ensuring
unrivalled fitment to your motorcycle. Made and Moulded in Italy with high
grade technopolymers.
Features:
Kit Includes: Front Fender, Front Plate, Fork Covers, Radiator
Shrouds, Side Panels, Air Box Panel, Rear Fender.
·
Re-Styled Front Fender to reduce weight and mud build up.
·
Radiator Shrouds feature an all over smooth
finish allowing for easy application of Graphics & Decals.
·
Highly Resistant Plastic, Quality Constructed.
·
Prevents Cracking, Fading and Chalking.
·
Made In Italy
Full Complete Plastic Kit to suit KTM SX/SXF 2023-2024
Renew your Ride with iPlastix. Quality construction, ensuring
unrivalled fitment to your motorcycle. Made and Moulded in Italy with high
grade technopolymers.
Features:
Kit Includes: Front Fender, Front Plate, Fork Covers, Radiator
Shrouds, Side Panels, Air Box Panel, Rear Fender.
·
Re-Styled Front Fender to reduce weight and mud build up.
·
Radiator Shrouds feature an all over smooth
finish allowing for easy application of Graphics & Decals.
·
Highly Resistant Plastic, Quality Constructed.
·
Prevents Cracking, Fading and Chalking.
·
Made In Italy
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Connected Riders GPS
The next evolution of Trail Techs most popular off-road GPS.
Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.
TRACKS AND WAYPOINTS
Record Tracks
GPX File Import and Export
Drop Customised Waypoints
Set Waypoints as Destination
Personalise Map Layer Colours
Plan & Record Entire Trail Systems
BUDDY TRACKING
Ride group visible on map
Up to 20 Buddies per Ride Group
Long range (depending on terrain)
Emergency Beacon Flashes Red on Friends Screens
Personalise Your Buddy Icon Colour and Name
Upgrade Buddy Antenna for Longer Range
Cellular service not required
MINI-MENU
Tracks
Waypoints
Map Layers
Map Options
Buddy Tracking Setup
1. What maps come standard with Voyager Pro?
Voyager Pro is pre-loaded with maps of the USA.
2. How do I upload different country and region maps to Voyager Pro?
Download maps from our website for free: https://www.trailtech.net/software/
3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?
Voyager Pro accepts tracks, routes, and waypoints in GPX format.
4. Can I use Voyager Pro without vehicle sensors?
Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).
5. How does Voyager Pro display speed?
All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.
6. How do I connect Voyager Pro to power?
Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.
For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)
7. Can Voyager Pro be turned on/off manually?
Yes, hold the upper left button to power Voyager Pro on/off.
8. How do I get the best GPS reception possible?
The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.
9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?
Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.
10. How does buddy tracking work?
Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.
The external antenna is required for buddy tracking to function properly.
11. How far is the range between riders when using buddy tracking?
The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.
12. In what regions of the world is buddy tracking currently enabled?
North America, Central America, South America, and Australia / New Zealand.
Kit Contents
10mm CHT Sensor: 7500-3012
Mounting: 9200-1000
Power Lead: 9000-1011
Ignition Sensor: 9000-1021
Dock: 9200-DOCK
Buddy Tracking Antenna: 9200-V2V1
Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:
Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
Plastic Kit Includes:
- Front Fender
- Front Number Plate
- Radiator Shrouds
- Side Panels
- Rear Fender
- Lower Fork Covers
Full Complete Plastic Kit to suit Husqvarna TC/FC 2023-2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Front Plate, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Shock Side Panel, Rear Fender.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Rear Fender.
· Re-Styled Front Fender to reduce weight and mud build up.
· Radiator Shrouds feature an all over smooth finish allowing for easy application of Graphics & Decals.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
The brand new Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Designed for kids (with a torso fit range of 30 Inches / 40cm)
- Breathable air mesh back panel for a lightweight, comfortable fit.
- Reflective accents for visibility in low-light environments.
- Secure zippered pockets for essentials.
- Lightweight, ventilated mesh harness.
- External reservoir fill lets you refill your reservoir without removing it from the pack.
Hydration Capacity: 1.5L / 50 oz
Total Capacity: 3L / 150 cu in
Total Weight: 7 oz / 210 g (pack only)
Dimensions: 19 X 10.5 X 2 in / 48.3 x 26.7 x 5.1 cm
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
Full Complete Plastic Kit to suit Husqvarna TE/FE 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Shock Side Panel, Rear Fender.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Full Complete Plastic Kit to suit Husqvarna TE/FE 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Shock Side Panel, Rear Fender.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Full Complete Plastic Kit to suit Husqvarna TE/FE 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Shock Side Panel, Rear Fender.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Rear Fender.
· Re-Styled Front Fender to reduce weight and mud build up.
· Radiator Shrouds feature an all over smooth finish allowing for easy application of Graphics & Decals.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Rear Fender.
· Re-Styled Front Fender to reduce weight and mud build up.
· Radiator Shrouds feature an all over smooth finish allowing for easy application of Graphics & Decals.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
Introducing the D-Lock grips with Lock On fixing system for fast and easy installation.
With2 different interchangeable pulleys to fix them on 2 stroke bike models: KTM, Husqvarna, GASGAS, Beta
HIGH GRIP technology: The knurling - Domino patented - maximizes the grip in any direction and the adherence between grips and gloves. An index-thumb pad and the 3 clings waffle on the back for increased grip.
Flange diameter: 61,5 mm
Grip end: Closed
Grips Lenght: 116 mm
Handle Diameter: 30 mm
Handlebar Diameter: 22 mm
Length: left 125 mm / right 130 mm
Material: Thermoplastic rubber
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis 2.0 Chain Guide Block easily replaces the entire O.E.M. unit and ensures durability and high resistance to shock and wear from the chain. Made of PA6, it is made of two parts that allow installation without removing the chain.
- 100% PA6 Construction.
- Highly resistant to shock and chain wear.
- Made of two pieces, allowing it to be mounted without removing the chain.
- In the event of collision or contact with roost, PA6 Material wont bend.
- Weight: 200 grams.
- Replaceable Inserts also Available. Part Sold Separately.
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Off Road Imports © 2024