- Brandsexpand_more
- doneAcerbis(2)
- doneMuc-Off(8)
Helmet, Visor & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat and oily residue from all helmets, eye wear and goggles. Its been formulated using de-ionised water as recommended by many helmet manufacturers and its safe to use on all lens materials including polycarbonate!
Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH neutral soaps. And you don't have to worry about the formula either! Its fully biodegradable and contains no solvents or harmful chemicals.
Its perfect for cleaning motorcycle goggles, cycling glasses and goggles as well as snowboard and ski goggles.
Features:
- Formulated using de-ionised water
- pH neutral formula as recommended by helmet manufacturers
- Free from solvents and harmful chemicals
- 100% biodegradable
Instructions for Use:
1. Spray Visor, Lens & Goggle Cleaner onto the surface.
2. Allow formula to soften any hard contaminant particles.
3. Gently wipe with a clean microfibre cloth.
Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.
It is a simple to use 'spray on' waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It's safe for the environment, as it's water-based and doesn't contain PFCs!
Our state-of-the-art 'spray on' formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you're protected to go and get rad in the harshest of conditions.
Features:
- PFC free, water-based formula
- Not harmful for the environment or to you
- Helps to repel wet mud and grime and protects against ground-in stains
- Will not impact breathability of garments
- Extends life and performance of garments
- Easy to apply, supplied in a spray bottle
- Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
- Will treat 1-2 garments per bottle!
Instructions for Use:
- Shake bottle well before use to activate the formula.
- Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
- Remove any excess treatment with a clean cloth.
- . Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing garment in wet conditions again.
- The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results
Depending on how much you use the 250ml bottle will treat around 2 garments (XL sized jackets) per bottle.
How long will the treatment last after application?
The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing.
All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer.
Can you use Rain Shield on normal clothes?
The spray will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.
Been shredding so hard that your kit has started to smell? You need Muc-Off Anti-Odour Spray! It's a highly effective, easy to use anti-odour spray that uses SILVERPLUS® silver ion technology.
It's ideal for removing odour caused by bacteria from body armour, shoe lining, gloves, pads or any soft material, synthetic fibre or textile that comes into contact with your skin and starts to smell over time.
Our spray leaves a long-lasting hygienic finish that instantly freshens your equipment. It's perfect for using while travelling, to help protect you and your kit when it's repeatedly used and can't be washed on the go.
Not only will it stop your kit smelling like a skip, but it'll even help it last longer!
Features
- Triple effect odour remover using SILVERPLUS® silver ion technology
- Effective against odour caused by bacteria for functional freshness
- Suitable and safe to use on most riding equipment and textiles (technical, sportswear, socks, shoes, body armour, pads, body armour and gloves made from textile or leather)
- Suitable to use on leather/suede/cotton/polycotton/softshell/technical fabrics/synthetics*
- Gentle on fabrics and skin when dry
- Provides freshness for up to 10 washes
- Perfect for staying clean and fresh during periods of intense activity such as multi-day bike park sessions, or adventure races when it's harder to wash your kit
- Easy to use spray on application in a 250ml spray bottle
*Check with equipment manufacturer care instructions before use.
Storage
- Store in a cool, dry place. Do not freeze or allow to frost.
- Use in a well-ventilated area
SAFETY INFORMATION
- Keep out of reach of children
- DO NOT USE ON ANY HEADWEAR INCLUDING HELMET LINERS.
- DANGER: Causes serious eye damage
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- FIRST AID: after inhalation: Supply fresh air; consult doctor in case of complaints.
- CONTAINS: Docusate sodium, Ethanol, Silver Chloride
- Ensure the item you are applying the spray to is clear of heavy mud/soiling before application.
- Shake the bottle vigorously before use to activate the formula.
- Spray directly onto desired area to neutralise odour.
- Absorb any excess spray with a clean microfibre cloth.
- Allow to air dry fully before use.
- We recommend leaving for 24 hours drying time before using the item it has been applied to.
- Can be reapplied as necessary. As an example, we would recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application.
we recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application.
How long will the treatment last after application?
This all depends on usage and climates using your equipment in but overall the treatment provides freshness for up to 10 washes but can be easily applied should items start to smell again due to continual use in warmer climates. Even small SILVERPLUS® quantities are sufficient to permanently control odour-causing bacteria in textiles.
Are there any textiles/fabrics this isn't safe to use on?
Only Polypropylene is more difficult to treat, the fibre surface can be too slippy for the treatment to adhere to.
Our eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. Our unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal to metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. Our formula will provide lubrication for long distance, on & off-road riding in all conditions under high torque loads. Unrivalled lube intervals will give you maximum protection over long distances.
Features
- Specifically formulated for eBike chains
- For long-distance all-weather on/off-road riding
- High-performance synthetic formulation for maximum protection
- Fully degrease and dry chain.
- Shake can vigorously and apply lube ensuring every part of the chain is treated.
- Re-apply to ensure maximum protection.
- Avoid contact with brakes.
- Store in a cool dry place.
Why do I need a specific lube for my e-bike?
Higher torque loads put more strain on your eBike drivetrain, so we have formulated specific lubes to include our unique eBike lubricity additive pack that laugh in the face of the extra torque to withstand a beating from even the most powerful eBike drivetrains. These state of the art formulas all offer class leading corrosion protection, and are highly efficient in terms of friction reduction to ensure the maximum power goes into the going faster and is not lost in drivetrain inefficiencies. The All Weather, Ceramic Wet and Dry Weather lubes have been developed to withstand the high torque lubes that are put through an eBike chain keeping your e-machine running smoother for longer.
What do the high torque loads on an e-bike do to chain and how does the lube combat this?
The high torque loads on an e-bike will wear down the chain much quicker than on a normal bike due to the increased and instant surges in power from the motor. This puts more strain through the chain and chain rings which will lead to higher friction from more metal to metal contact, which will lease to wear, if the correct lube isn't used. Our e-bike Lubes were developed to combat this with their unique blend of synthetic oils, a high level of bespoke additives and Boron Nitride which mean they will last longer and reduce friction across the drivetrain, even under the increased loads.
If there is increased wear on the e-bike chain does using the eBike lube make the chain wear the same as on a normal none-bike?
Using our e-bike lubes will help to dramatically reduce fiction while riding and will keep the chain running smoother for much longer than a traditional lube, however there will always be higher stresses on the chain due to the power assisted motor reducing the life of any chain more so than on a normal bike.
Is the lubrication interval the same as a normal bike?
We would recommend cleaning and re-lubing your e-bike chain more often, as often as you can...after each ride if possible. Doing this will prolong the life of your chain and other drivetrain components which can be costly to repair.
What is Boron Nitiride, what does it do?
Boron Nitride is an advanced particle which is present in our lube. It offers increased levels of durability and wear resistance as well as excellent lubrication properties. It forms a stable tribofilm, which is important to achieve improved tribological performance needed from an ebike specific lube.
What's the ebike additive pack?
The ebike additive pack is the name we gave to the extra high levels of 'extreme pressure additives' which we have added to our ebike lubes to decrease wear, even under the higher torque loads of an ebike drive system. These help to provide increased wear protection on all treated parts
Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.
Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.
Features:
- Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
- Readily Biodegradable
- Active agent derived from a renewable source
- Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
- Spray on formula is easy to use
- Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight a. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
- Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
- After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
- Follow by protecting with one of our protective sprays or polishes.
*We recommend testing a small, inconspicuous area first to ensure compatibility with your specific vehicle's finish. Not suitable for prolonged contact with rubber.
Store in a cool dry place out of reach of children.