High-impact black foot for use with square Trail Tech kickstand leg
Note:
Part number 5925-foot (Black) only fits the square Trail Tech kickstands
1. With the kickstand arm mounted to the motorcycle hold the replacement foot near the insertion hole and note rotation to allow the foot to lay flat on the ground once installed.
2. Remove the kickstand arm from bike
3. Remove old foot. This is usually accomplished by putting the foot in a vise and inserting a long screw driver or arm in the pivot bolt mounting hole and twisting it loose while pulling. To ease removal of the foot heat can be applied to the leg with a heat gun.
4. Clean and remove all oils and residue form the new foot and the kickstand foot hole
5. Use threadlocker (Surlok 1270) on the entire ribbed area that fits into the kickstand cavity to glue the foot in place
6. To insert the foot we recommend using a press. Other methods can be used. Make sure the rotation is correct and push the foot into place until it is fully bottomed against the lower flange. IMPORTANT: ALWAYS USE EYE PROTECTION WHEN USING A PRESS OR HAMMER OPERATION.
7. Wipe clean all remaining loctite
8. Remount arm to bike and insure the rotation of the foot is correct. If not use a soft jaw vice to hold the foot and twist it to the correct rotation.
9. Allow 24 hours before use of the kickstand.
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:
Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!
Replacement Gauge Only.
Features Description
Temp Sensor -40°C/F - 300°C/575°F
Power Description
Power Requirements 12V DC Only
Physical Features Description
Physical Dimensions
Screen Size 23.7x13.6mm (.93x.53in)
TRAIL TECH VOYAGER PRO REPLACEMENT HEAD UNIT
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Temperature Sensor: Radiator Fin, 7mm Wide, 180mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freerides and Honda radiators
-Easy install
-Short Fin Sensor can be used on the 732-FN9 fan kit.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 180mm
(7%u201D)
Diameter 7mm
Temperature Sensor: Radiator Fin, 8mm Wide, 550mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freeride and Honda radiators
-Easy install
-Great sensor for Voyager, Vapor, Striker and TTO gauges.
Engineered for durability. Upgrade the standard Voyager Pro dock with this premium aluminum replacement. The EXTREME ALUMINUM DOCK is machined from billet aluminum, with additional enhancements for water diversion, positive thumbscrew lock and mechanically improved pins. Hard mount with quick removal of the Voyager Pro GPS.
Made to hold up even on the roughest trails.
Keep your bike cool with Trail Techs Universal Fan Kit. This fan kit is easy to install and operate.
Recommended for Radiators
Custom adjustment of temperature trigger point.
- Fused Wire Harness
- No cutting of fluid lines
- 30 watt draw
- 4 Inch fan
- 10.5V TO 14.5V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 109 X 109 X 48MM
Contents
4 Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S01
Radiator Bracket: 3330137
Temperature Sensor: 7500-3006
Wire Harness: 732-WH2
Temperature sensor extension lead 1800mm (72") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1800mm
(72%u201D)
Trail Techs TTO Temperature Switching Fan Kit monitors your Hondas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
- Custom adjustment of temperature trigger point
- No cutting of fluid lines
- Fused Wire Harness
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 210 X 120 X 85MM
Contents
A Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR03
Temperature Sensor: 732-TS1
Wire Harness: 732-WH1
Mounting bracket for Vapor/Striker, vertical surface attachment.
Ideal for mounting to KTM.
The Voyager Pro dock hard-mounts to the vehicle and allows quick removal of Voyager Pro.
Voyager Pro snaps on, is released by the large button on top, and can be locked using the Allen key.
Vehicle sensors plug into the back with waterproof white JST connectors.
The V2V antenna screws into the port on the back.
The black rubber guard is magnetic and protects the brass pins while Voyager Pro is removed.
Attaches to vehicles using the AMPs hole pattern. Compatible with Trail Tech mounting hardware and RAM brand mounts.
Included in Voyager Pro kits
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Temperature sensor extension lead 1200mm (48") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1200mm
(48%u201D)
Aluminium centre mount for 1-1/8'' handlebars.
Positions the gauge directly in the centre of the bars.
Works best on motorcycles where the bar clamp is split to expose the centre of the bar, especially KTM and Husqvarna.
Comes with four M4x12mm screws to attach the Voyager Pro dock.
Voyager GPS Unit Not Included.
This carbon fiber inspired hard case is designed to tightly grip the Trail Tech Portable Air Compressor for off-road, UTV, overland and motorcycle tire inflation on the trail. Portable, lightweight, and compact, perfect for stashing in luggage, side cases or carrying bags on adventure bikes and dirt bikes. The internal mesh pocket provides storage for additional small items, including the quick-connect air trachea, valve adapters and USB charging cable.
PERFECT FIT: HARD CASE ONLY! (Portable air compressor and accessories sold separate.) This Trail Tech Hard Case is custom fitted for the Trail Tech Portable Air Compressor. The case external dimensions 9x5x3" and internal dimensions 8x4x2" expertly holds the air pump and can be stowed discreetly in your motorcycle, UTV, Jeep, SxS, truck or another wheeled vehicle.
FIRST IMPRESSION: This Trail Tech travel case is made of faux carbon fiber on the outside with soft and fluffy black fabric on the inside. Gives shockproof, waterproof, dust protection, and anti-static properties to your tire inflator. Provides travel protection for your Trail Tech tire inflator portable air compressor, valve adaptors, quick-connect trachea air tube and USB charging cable.
BEST USE: This hard case is form fitted to the Trail Tech Portable Air Compressor and features an extra mesh pocket for organizing and storing accessories, like American style quick-connect trachea, valve adapters, storage bag and USB charging cable.
COMPATIBLE: The Trail Tech Air Compressor Hard Case has a small handle and is compact in shape. Perfect for stowing in motorcycle bags, car trunk or in a backpack. It is very convenient for tire pump storage and bringing to your next outdoor adventure.
PROGRAMMABLE PSI
This programmable, portable air compressor keeps your tires inflated and allows you to change your tire pressure on the fly. For motorcycles, mountain bikes, UTVs, ATVs and automobiles.
Handheld for simple user experience, featuring a Li-ion battery with cooling fan, ruggedized trachea, programmable PSI pressure settings, and an LED light. Can also be used as a USB phone charger.
2-year warranty.
IN THE BOX: This kit comes with the air compressor, USB-C cable for charging, flexible hose/trachea, Presta valve, sports needle for balls, English user guide and flexible black storage bag.
FIRST IMPRESSION: The pump is compact in size with a strong 5000 mAh capacity. Operation is simple, there are predefined values, but you can modify or choose the pressure manually. Hit the switch and when it reaches the desired air pressure it stops automatically, making pressure changes simple and fast for the user.
BEST USE: Great for inflating the wheels of motorcycles, UTVs, bicycles, cars, ATVs, basketballs, and other inflatable sporting equipment. Equipped with LED light to act as flashlight. There's even an option to charge phones from the air compressor. This is a must have daily carry for all vehicles.
ACCURACY: This air pump is accurate with great build quality. Simply dial up the desired air pressure and press start. The pump will automatically stop when it reaches the desired pressure. Switch between pressure measurements (PSI, Bar, etc.).
PUMP SPEED: Rapidly fill motorcycle, UTV, car and bicycle tires on one charge. It takes about 5 minutes for a typical tire to inflate, depending on its size and starting pressure. Works from 2-150 PSI or 0.2-10.3 BAR. Inflate approximately 4 motorcycle tires from empty, or about 20 low-pressure Powersports tires to the proper level. This depends on the tires air pressure. Note: The air compressor battery fully charges in one hour.
HARD CASE ACCESSORY: The Portable Air Compressor comes with a flexible black storage bag. An accessory faux carbon fiber hard storage case is available for purchase separately, please see related products.
COMPATIBLE: Works with most types of tires and sporting equipment. The kit includes an American quick-connect trachea and a Presta adapter. The trachea is compatible with Schrader valves. The Presta adapter allows compatibility with Presta valves. There's also a sports needle included.
SPECIFICATIONS:
Battery Capacity: | 5000mAh |
USB-C In, USB-A Out: | 5V/2A |
Phone Charge Time: | 80 minutes |
Fill Rate: | 25L/Min, or 0.88 CFM |
Inflation Range: | 2-150PSI (0.2-10.3BAR) |
Dimensions: | 6.4 x 2.7 x 1.5 (162 x 68 x 38mm) |
Weight: | 1.1 lbs (17 oz.) |
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.
The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.
Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.
The Vapor features LED Backlit Multi-Screen Display
Choose from one of three main screens to set as the default home screen:
Screen 1
-Speed
-Tachometer Bar Graph
-Trip Distance Clock
-Ambient Air Temperature
-Engine Temperature
Screen 2
-Speed
-Tachometer Bar Graph
-Numerical RPM
-Engine temperature
-Stop watch
-Ride time
Screen 3
-Max speed
-Max engine temperature
-Max RPM
-Accumulated ride time (total hours)
-Odometer
Kit Contents:
22mm Water Sensor: 7500-3060
25mm Water Sensor: 7500-3076
Magnet Kit: 2010-01
Wheel Sensor: 700-06
Mounting: 9000-1000
Power Lead: 9000-1011
Ignition Sensor: 9000-1021
Ignition Sensor: 7000-1004
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Off Road Imports © 2024