- Brandsexpand_more
- doneAcerbis(22)
- doneKite Performance(2)
- doneMuc-Off(1)
Suitable for transporting motorcycles. These straps are 25 mm wide and 170 cm long. Load carrying capacity is 600 kg. Sold in a pair.
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
ACERBIS FORK SAVER BRACE BLACK
Limits pressure on the fork during transport, when the fork seals of the suspension are under strain from the pressure exerted by the motorbike straps
Easily positioned by fastening and snapping it into place between the forks, the front wheel and the front mudguard, making the motorbike stable for transportation.
Can be used for transport with a trailer, van or pick-up
Mini Number plate sticker in the middle for the possibility of customising your Acerbis Fork Saver to match the bike or rider.
Includes a bar ends guard cap that can be removed and placed over the end of your handlebar grips. Helps prevent your grips from being damage when bars come into contact with each other when transporting several motorcycles or if you need to lean your motorcycle up against a wall or trailer.
The bar end guard can be used with open MX or closed endure handguards.
Resistant and light
Quick installation
The Acerbis bike cover is perfect for keeping dust and/or sun off your bike in the garage or at the track. Not designed for use when trailering.
- Multifunctional stand for MTB / E-BIKE
Vertical bike position: Space-saving, free up to 1.1m in the garage, safety and stability in seconds, allowing maintenance of the front wheel
Horizontal bike position with rear wheel raised: allows maintenance of the rear wheel, crankset and chain
Horizontal position with front wheel raised: allows storage or washing of the bike - Steel structure
- Tire housing width 78mm
- Compatible for tires up to 2.8"
- Extremely practical in inserting and extracting the bike
- Compatible for eBikes, MTB, racing bikes and trekking bikes
- Stability on both rear and front wheels
- Compatible with 26 / 27.5 / 29 wheels
- It rests only on the tire avoiding damaging the spokes and frame
- OTHERS 5%
- STEEL 95%
The Muc-Off Secure AirTag™ Holder For Powersports offers a secure way to install an Apple AirTag to your ride, so you can track down or keep tabs on your pride and joy using the FindMy™ app.
Your AirTag* will be securely housed in a two-part, heat resistant polymer holder, surrounded by a precision machined, aircraft-grade 6061 aluminium frame and clamp. It also comes supplied with security Torx screws and a lockable clamp to make sure it stays put!
*AirTag not included with mount!
Features:
- Durable, precision CNC machined, 6061 aluminium frame and clamp
- Easy to install and mount securely
- Super stealthy, non-rattle design
- Supplied with anti-theft security screws and clamp key
- 2 part, heat resistant polymer holder
- Small, lightweight, super-easy to fit
- Supplied with 4 different silicone clamp grip sizes enabling you to mount to different diameter wires and cables
- Designed to be mounted discreetly in hidden areas, i.e. under motorcycle seat, within the engine bay or under side fairings
- Ideally suited to high populous areas such as city centre
- 1 x Secure AirTag Holder Clamp and Tag Holder
- 4 x Silicone clamp grip sizes
- 4 x Security screws
- 1 x Security key
- Remove all the components from the packaging, then start by unscrewing the three rear security screws from the back plate using the security key supplied.
- Ensure your AirTag is set up and connected to your FindMy App on your iPhone.
- Remove the rear door plate then place your AirTag into the slot with the silver battery cover facing down towards the recess inside the front plate.
- Place the rear door plate back into place then re-install the 3 Torx screws. Do not overtighten the screws!
- Once the AirTag is installed into the holder choose your mounting location, such as a cable hidden below the seat or around the engine bay, out of sight. Remember, the better you hide it, the less chance thieves have of discovering it!
- Unscrew the clamp screw then select the appropriately sized silicone insert from the 4 sizes provided to fit between the clamp.
- We recommend fitting the silicone insert around the cable where you'd like to mount the holder first, then open the clamp and fit it over the top. Do not mount directly next to parts or components that get hot, are critical control systems or mechanical parts.
- Finally tighten the security Torx screw with the Torx key supplied. Do not overtighten the screw!
- Go Ride!
Please Note: Do not mount directly next to parts or components that get hot, are critical control systems or mechanical parts.
Length : 170 cm x 2.5cm
Maximum tensile load: 80kg
Set of two belts equipped with non-slip safety metal buckle
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
ACERBIS FORK SAVER BRACE BLACK
Limits pressure on the fork during transport, when the fork seals of the suspension are under strain from the pressure exerted by the motorbike straps
Easily positioned by fastening and snapping it into place between the forks, the front wheel and the front mudguard, making the motorbike stable for transportation.
Can be used for transport with a trailer, van or pick-up
Mini Number plate sticker in the middle for the possibility of customising your Acerbis Fork Saver to match the bike or rider.
Includes a bar ends guard cap that can be removed and placed over the end of your handlebar grips. Helps prevent your grips from being damage when bars come into contact with each other when transporting several motorcycles or if you need to lean your motorcycle up against a wall or trailer.
The bar end guard can be used with open MX or closed endure handguards.
Resistant and light
Quick installation
Acerbis Elevator Swivel Bike Stand
- Steel constructed Lift-Stand with an additional damper to slow the period of descent when lowering.
- Rubber upper deck with adjustable height to adapt to most full-size off-road dirt-bikes as well as youth/mini bikes.
- Rotating upper deck to allow movement of the bike during maintenance.
- Locking mechanism to secure the stand and prevent accidental lowering of the bike.
- Maximum height of the bike: adjustable from 33 to 46 cm.
- Minimum height of the bike: adjustable from 23,5 to 36 cm for minicross
- Maximum load: 160 Kg
- 6 arm retaining strap
- 6 straps with 980mm length / 25mm width and hook
- S-hooks in steel with PVC coating for protection against scratches
- Maximum load 100kg / 220 Lb
- POLYESTER 92,00%
- STEEL 8,00%
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
- Folding stand for off-road motorbikes.
- Load capacity maximum of 250 kg (=551.15 Lb) including rider.
- The structure consisting of 6 plastic sections, joined by the two upper plates, provides the motorbike with excellent stability and offers a comfortable grip handle when the stand is closed.
- There is a non-slip and scratch-resistant surface on the top.
- Integrated customisable number plate and graphite template available
- Stand takes up very little space when folded flat. Great for when transporting
- Embossed logo
- Weight 3300 g
Dimensions:
- Height when closed: 610 mm;
- Height when open: 425 mm;
- Width when closed: 50 mm;
- Top surface: 300x320 mm;
- Base: 420x450 mm
The Acerbis 711 Value Pack is the perfect way to get your store set up to sell this amazing stand. The pack includes one of each colour stand at a specially discount price giving you almost 90% mark up.
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg
Padded protection for brake disc rotors while wheels are out of the motorcycles
Sold as a pair
Padded protection for rear sprocket while wheel is out of the motorcycles
Acerbis 711 Bike Stand
The structure is created using a special high-resistance technopolymer, combined with two upper tubes in steel
Upper mat with anti-slip design to facilitate maximise grip
A removable top wedge to balance and stabilise bikes with different frame types.
Central hole for draining engine oil or double as holder for Acerbis Quick Fill
The very wide feet and knurled surface prevent any swaying, ensuring that the stand is very stable on sandy or muddy ground.
Side moulded front plate design for customising stand to each rider. Graphic template available upon request
Maximum load 240 kg