• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel.

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Ultimate Hand Guard speaks for itself, it is the ultimate Motorcycle Open Hand Guard. Featuring a unique mounting bracket which makes set up and placement on your handlebars easy. It allows you to maintain original positions of other Handle Bar Controls including Enduro Switch Blocks etc. Its modern, sharp design also incorporates removable Lower and Upper Spoilers to enhance Maximum Ventilation and to Limit Wind Resistance. The Spoilers are also horizontally adjustable making sure that your Hand Guard placement is always where you want it.

- Removable Upper & Lower Spoilers for Ventilation

- Universal mounting behind the Brake Master Cylinder

- Horizontally Adjustable

- Nylon Bracelets

* Application: Handlebars external diameter from 22mm to 28mm, and Twin Wall.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

Universal mount kit that allows fitment of Acerbis handguards to 7/8 inch and 1-1/8 inch bars.

Different size shims allow one kit to fit many different handlebars.

Curved off-set design provides plenty of clearance for hydraulic brake and clutch lines.

As used with Acerbis X-Factory handguards.

Aluminum construction.

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Open hand guard with universal mounting kit

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps

Also applicable for fitment to enduro models with control switches.

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Handguard protecting hands (branches, debris, cold, etc.) and E-BIKE/ MTB / MINICROSS handlebar control units

Manufactured in thermoplastic: lightweight, compact and crash-resistant

universal fixing bracelet for all E-BIKE/ MTB / MINICROSS handlebars

Easy mounting by openable collar, not requiring the handlebar control units to be disassembled

Spoiler (also removable) designed to protect the brake and/or clutch pumps.

Manufactured to be used on all E-BIKE/ MTB / MINICROSS

20% Nylon

70% Polypropylene

10% Other

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Replacement spoiler for Rally Brush Handguards.

Sold as a pair 

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm