Replacement spoiler for Rally Brush Handguards.

Sold as a pair 

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

Replacement dual injected polypropylene shields for the X-Factory Handguards.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open MX Style handguard with universal mount for all types of handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and light weight and offers adequate ventilation points
• The under loop mount allows for independent vertical adjustment of the handguard and lever assembly. 
• Mounts to bar without interference to other clamped controls allowing them to remain in their original positions.
• Tilt adjustable spoiler for optimal hand coverage.
• Quick to assemble spoiler due to the use of 2 self-tapping screws 
• Mounting kit included
• Logo embossed
• 425g including packaging
• 80X120X270cm
• 45% Polypropylene
• 32% Nylon
• 23% Steel

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

Replacement dual injected polypropylene shields for the Endurance-X and X-Factor Handguards.

Sold as a pair

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

Handguard protecting hands (branches, debris, cold, etc.) and E-BIKE/ MTB / MINICROSS handlebar control units

Manufactured in thermoplastic: lightweight, compact and crash-resistant

universal fixing bracelet for all E-BIKE/ MTB / MINICROSS handlebars

Easy mounting by openable collar, not requiring the handlebar control units to be disassembled

Spoiler (also removable) designed to protect the brake and/or clutch pumps.

Manufactured to be used on all E-BIKE/ MTB / MINICROSS

20% Nylon

70% Polypropylene

10% Other

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel 

• Open handguard with direct attachment to the lever mounts, giving rigidity without cluttering the handlebars
• Made of polypropylene with Nylon mounts
• Its design gives it strength and lightness and offers adequate ventilation points
• Quick to assemble spoiler by use of two self-tapping screws
• Mounting kit included
  
• Logo embossed
• Weight: 425 g including packaging
• 80X120X270
• 45% Polypropylene
• 32% Nylon
• 23% Steel