Muc-Off Technical Wash is a wash-in cleaner that safely removes dirt, grime, and odours from your technical gear. The unique, concentrated formula gives your garments a deep but safe clean, whilst protecting any existing DWR treatments and the breathability of the material, so it's perfect for freshening up and extending the life of those shred threads! It can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing.
Features:
Instructions for Use:
TOP TIP
If washing water repellent/waterproof garments we'd recommend re-treating with our Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water repellent finish. Follow the directions for use on the bottle for application details.
How many washes will I get per 300ml/10.14oz bottle?
If you use the suggested measure of 25ml-0.16oz per wash load you will get 12 washes per bottle.
When should I wash my technical apparel?
All technical apparel, especially waterproof apparel needs regular washing to keep the membranes breathing and performing at their best. If your apparel is starting to wet out or mud and grime is clinging to the surface, then it's time for a wash with our Technical Wash.
What wash temperature should I use when washing my garment?
We'd always recommend following your garment manufacturers care label instructions which will provide you with their recommended wash temperature. For an outdoor technical garment this will usually be 30C-86F or 40C-104F. Muc-Off Technical Wash is formulated to work at any temperature.
Voyager Top Triple Clamp Mount Bracket for perches bolted on and 100-106mm spacing.
Voyager Top Mount Protector
Protector works Voyager ONLY Not Voyager Pro.
Protector will include the External Antenna 9000-EAA
Voyager/Vapor Ignition Sensor 2550mm Length (100").
Type
Voyager & Vapor ignition Sensor
Physical Features
Wire Length 1800mm
(70.87%u201D)
Magnet Kit: Yamaha ATV Z400 KFX400 Rhino.
Trail Techs TTV Temperature Switching Fan Kit monitors your KTM or Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
Custom adjustment of temperature trigger point.
- Plugs into most stock KTM harnesses
- No cutting of fluid lines
- 30 watt draw
- 4 Inch fan
- 12V DC Only
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 210 X 120 X 85MM
Contents
4 Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR05
Temperature Sensor: 7500-3005
Wire Harness: 732-WH1
Voyager/Vapor/Endurance II Power Connection 1220mm (4in).
Type
Voyager Power Lead
Physical Features
Wire Length 1220mm
Head Unit Only (No Sensors).
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Speed sensor cable extension 600mm (24") long.
Type
Extension for Speedometer Cable Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Temperature sensor extension lead 600mm (24") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Includes eight indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral and Reverse.
Hitting the streets?
The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond.
With eight different indicators included, customize your dashboard your own way.
Attaches to Trail Tech Vapor/Striker and installs easily on the triple clamp of most motorcycles.
*This is a universal part and does not include model specific instructions. Digital Guage not included.
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
OEM Replacement Leg ONLY
Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 10mm
Includes eight indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral and Reverse.
Hitting the streets?
The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond.
With eight different indicators included, customize your dashboard your own way.
Attaches to Trail Tech Vapor/Striker and installs easily on the triple clamp of most motorcycles.
*This is a universal part and does not include model specific instructions.
Temperature Sensor: Cylinder Head 14mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 14mm
Temperature Sensor: 22mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 22mm (0.87")
Temperature Sensor: 25mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 25mm (0.98")
Temperature Sensor: Radiator Fin, 7mm Wide, 550mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freeride and Honda radiators
-Easy install
-Great sensor for Voyager, Vapor, Striker and TTO gauges.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 550mm
(21%u201D)
Width 7mm
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Temperature Sensor: 16mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 550mm
Diameter 16mm (.063")
Temperature Sensor: Radiator Fin, 8mm Wide, 180mm Long
-No cutting of fluid lines, or draining radiator
-Fits most stock KTM Freerides and Honda radiators
-Easy install
-Short Fin Sensor can be used on the 732-FN6 fan kit.
Type
Engine Temperature Water Cooled Machines
Radiator Fin
Physical Features
Wire Length 180mm
(7%u201D)
Diameter 8mm
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.
The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.
Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.
The Vapor features LED Backlit Multi-Screen Display
Choose from one of three main screens to set as the default home screen:
Screen 1
-Speed
-Tachometer Bar Graph
-Trip Distance Clock
-Ambient Air Temperature
-Engine Temperature
Screen 2
-Speed
-Tachometer Bar Graph
-Numerical RPM
-Engine temperature
-Stop watch
-Ride time
Screen 3
-Max speed
-Max engine temperature
-Max RPM
-Accumulated ride time (total hours)
-Odometer
Kit Contents:
25mm Water Sensor: 7500-3076
M6x1 Screw Temp Sensor: V300-003
Magnet Kit: 704-01
Wheel Sensor: 704-06
Mounting: 9000-1000
Power Lead: 9000-1011
Ignition Sensor: 9000-1021
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
OEM Replacement Leg ONLY
Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.
The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.
Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.
Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
12V DC power required, make sure your vehicle has a battery.
Speed: 0-999 MPH
Distance: 0-250,000 mi
Altitude: 59,000 ft
Temperature: 0-260C
Accum. Run Time: 0-1,000,000 hr
GPS Sample Rate: 1-5 sec
External Power Input: 12V-60V DC
Internal Battery: 3.7V 900 mAh Li-Ion
Battery Life (Typical Use): 11 hours
Battery Life (100% Backlight): 6 hours
Battery Charge Time: 3-8 hours
Geodetic Datum: WGS84
GPS Chipset: MediaTek MT3329
Joystick: 5-Position High-Tactile
Wheel Sensor: Non-contact Magnet Sensor
Backlight: LED Group
Screen: 68.6mm Diagonal
Physical Dimensions: 113 x 62 x 28.2mm
Physical Weight: 172g
Max Waypoints: 300 waypoints
Max Track Points: 72,500 points
Max Route Points: 72,500 points
Max Tracks/Routes: 300 each
Kit Contents
25mm Water Sensor: 7500-3076
Magnet Kit: 704-01
Wheel Sensor: 704-06
Mounting: 9000-1000
Power Lead: 9000-1011
Ignition Sensor Lead: 9000-1021
Micro SD Card Reader: 9000-MSDA
Micro SD Card: 9000-MSD2G
Protected by US Patent
Patent No. 8,708,205
Patent No. 8,848,356
Patent No. D635497
Patent No. D647434
Trail Techs TTV Temperature Switching Fan Kit monitors your Yamahas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
Custom adjustment of temperature trigger point.
- No cutting of fluid lines
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 109 x 109 x 48mm
Billet Aluminium Protector for Voyager Pro adds durability and protection for extreme riding conditions.
The Voyager Pro Protector is a precision billet aluminium case black anodizing for a clean look and designed to protect your Voyager Pro GPS unit from the elements and debris, while still allowing you to access to the SD card slot.
The Voyager Pro Protector gives nearly 360 degrees of protection insure this case will protect the Voyager Pro from front slapping branches as well as the screen from crashes.
Our complete kit includes an Aluminium Bar Mount and all the hardware necessary to assemble and mount to your Vehicle.
*Voyager Pro & Dock Not Included
Off Road Imports © 2024