High-impact black foot for use with square Trail Tech kickstand leg

Note:

Part number 5925-foot (Black) only fits the square Trail Tech kickstands

1. With the kickstand arm mounted to the motorcycle hold the replacement foot near the insertion hole and note rotation to allow the foot to lay flat on the ground once installed.

2. Remove the kickstand arm from bike

3. Remove old foot. This is usually accomplished by putting the foot in a vise and inserting a long screw driver or arm in the pivot bolt mounting hole and twisting it loose while pulling. To ease removal of the foot heat can be applied to the leg with a heat gun.

4. Clean and remove all oils and residue form the new foot and the kickstand foot hole

5. Use threadlocker (Surlok 1270) on the entire ribbed area that fits into the kickstand cavity to glue the foot in place

6. To insert the foot we recommend using a press. Other methods can be used. Make sure the rotation is correct and push the foot into place until it is fully bottomed against the lower flange. IMPORTANT: ALWAYS USE EYE PROTECTION WHEN USING A PRESS OR HAMMER OPERATION.

7. Wipe clean all remaining loctite

8. Remount arm to bike and insure the rotation of the foot is correct. If not use a soft jaw vice to hold the foot and twist it to the correct rotation.

9. Allow 24 hours before use of the kickstand.

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

TRAIL TECH VOYAGER PRO REPLACEMENT HEAD UNIT

Fits ALL Trail Tech gauges More

Includes ten indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral, and Reverse

Hitting the streets?

The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond.

With ten different indicators included, customize your dashboard your own way.

This part has been specially designed to work with any Trail Tech Gauge and Compatible with most other Gauges as well, in almost any orientation that works with your vehicle and dashboard!

*This is a universal part and does not include model specific instructions. Digital gauges pictured sold separately.

AC Wall Charger for Voyager and Voyager Pro.

Used when Voyager will not be charged by the vehicle electrical system. Bikes without electric starts or headlight may require it. (Not included in Voyager kits)

The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.

The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.

Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.

The Vapor features LED Backlit Multi-Screen Display

Choose from one of three main screens to set as the default home screen:

Screen 1

-Speed

-Tachometer Bar Graph

-Trip Distance Clock

-Ambient Air Temperature

-Engine Temperature

Screen 2

-Speed

-Tachometer Bar Graph

-Numerical RPM

-Engine temperature

-Stop watch

-Ride time

Screen 3

-Max speed

-Max engine temperature

-Max RPM

-Accumulated ride time (total hours)

-Odometer

Kit Contents:

22mm Water Sensor: 7500-3060

Magnet Kit: 704-01

Wheel Sensor: 704-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.

The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.

Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.

The Vapor features LED Backlit Multi-Screen Display

Choose from one of three main screens to set as the default home screen:

Screen 1

-Speed

-Tachometer Bar Graph

-Trip Distance Clock

-Ambient Air Temperature

-Engine Temperature

Screen 2

-Speed

-Tachometer Bar Graph

-Numerical RPM

-Engine temperature

-Stop watch

-Ride time

Screen 3

-Max speed

-Max engine temperature

-Max RPM

-Accumulated ride time (total hours)

-Odometer

Kit Contents:

7mm Fin Sensor: 7500-3003

Magnet Kit: 100-01

Wheel Sensor: 101-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.

The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.

Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.

The Vapor features LED Backlit Multi-Screen Display

Choose from one of three main screens to set as the default home screen:

Screen 1

-Speed

-Tachometer Bar Graph

-Trip Distance Clock

-Ambient Air Temperature

-Engine Temperature

Screen 2

-Speed

-Tachometer Bar Graph

-Numerical RPM

-Engine temperature

-Stop watch

-Ride time

Screen 3

-Max speed

-Max engine temperature

-Max RPM

-Accumulated ride time (total hours)

-Odometer

Kit Contents:

19mm Water Sensor: 7500-3052

Magnet Kit: 2010-01

Wheel Sensor: 2010-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Ignition Sensor: 7000-1004

Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.

The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.

Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.

Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.

At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.

12V DC power required, make sure your vehicle has a battery.

Speed: 0-999 MPH

Distance: 0-250,000 mi

Altitude: 59,000 ft

Temperature: 0-260C

Accum. Run Time: 0-1,000,000 hr

GPS Sample Rate: 1-5 sec

External Power Input: 12V-60V DC

Internal Battery: 3.7V 900 mAh Li-Ion

Battery Life (Typical Use): 11 hours

Battery Life (100% Backlight): 6 hours

Battery Charge Time: 3-8 hours

Geodetic Datum: WGS84

GPS Chipset: MediaTek MT3329

Joystick: 5-Position High-Tactile

Wheel Sensor: Non-contact Magnet Sensor

Backlight: LED Group

Screen: 68.6mm Diagonal

Physical Dimensions: 113 x 62 x 28.2mm

Physical Weight: 172g

Max Waypoints: 300 waypoints

Max Track Points: 72,500 points

Max Route Points: 72,500 points

Max Tracks/Routes: 300 each

Kit Contents

7mm Fin Sensor: 7500-3003

Magnet Kit: 100-01

Wheel Sensor: 101-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor Lead: 9000-1021

Micro SD Card Reader: 9000-MSDA

Micro SD Card: 9000-MSD2G

Protected by US Patent

Patent No. 8,708,205

Patent No. 8,848,356

Patent No. D635497

Patent No. D647434

The Vapor Speedometer/Tachometer is a popular choice for both on and off-road enthusiasts. Replace your factory gauge or add the Vapor Gauge to your custom bike build.

The main features include a large RPM graph and speed readout, with much more data built in. At the top, programmable LED lights blink when its time to shift gears or during an over-temp event.

Vapor can replace an entire instrument cluster on your dashboard. Vapor displays speed, tach, engine temperature, ambient temperature, resettable distance, clock, ride time, and odometer. Maximum values are displayed for temperature, speed, and RPM (reset trip data to start fresh max values.) Use the built-in stop watch for race training, or resettable trip distance for Enduro courses.

The Vapor features LED Backlit Multi-Screen Display

Choose from one of three main screens to set as the default home screen:

Screen 1

-Speed

-Tachometer Bar Graph

-Trip Distance Clock

-Ambient Air Temperature

-Engine Temperature

Screen 2

-Speed

-Tachometer Bar Graph

-Numerical RPM

-Engine temperature

-Stop watch

-Ride time

Screen 3

-Max speed

-Max engine temperature

-Max RPM

-Accumulated ride time (total hours)

-Odometer

Kit Contents:

22mm Water Sensor: 7500-3060

25mm Water Sensor: 7500-3076

Magnet Kit: 2010-01

Wheel Sensor: 700-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Ignition Sensor: 7000-1004

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

Trail Techs TTV Temperature Switching Fan Kit monitors your Vehicles cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

- Custom adjustment of temperature trigger point.

- Fused Wire Harness

- No cutting of fluid lines

- 30 watt draw

- 4 Inch fan

- 10.5V TO 14.5V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 109 x 109 x 48mm

Contents

4 Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S01

Radiator Bracket: 3330137

Temperature Sensor: 7500-3007

Wire Harness: 732-WH1

This carbon fiber inspired hard case is designed to tightly grip the Trail Tech Portable Air Compressor for off-road, UTV, overland and motorcycle tire inflation on the trail.  Portable, lightweight, and compact, perfect for stashing in luggage, side cases or carrying bags on adventure bikes and dirt bikes.  The internal mesh pocket provides storage for additional small items, including the quick-connect air trachea, valve adapters and USB charging cable.

PERFECT FIT: HARD CASE ONLY! (Portable air compressor and accessories sold separate.) This Trail Tech Hard Case is custom fitted for the Trail Tech Portable Air Compressor.  The case external dimensions 9x5x3" and internal dimensions 8x4x2" expertly holds the air pump and can be stowed discreetly in your motorcycle, UTV, Jeep, SxS, truck or another wheeled vehicle.

FIRST IMPRESSION: This Trail Tech travel case is made of faux carbon fiber on the outside with soft and fluffy black fabric on the inside.  Gives shockproof, waterproof, dust protection, and anti-static properties to your tire inflator.  Provides travel protection for your Trail Tech tire inflator portable air compressor, valve adaptors, quick-connect trachea air tube and USB charging cable.

BEST USE: This hard case is form fitted to the Trail Tech Portable Air Compressor and features an extra mesh pocket for organizing and storing accessories, like American style quick-connect trachea, valve adapters, storage bag and USB charging cable.

COMPATIBLE: The Trail Tech Air Compressor Hard Case has a small handle and is compact in shape.  Perfect for stowing in motorcycle bags, car trunk or in a backpack.  It is very convenient for tire pump storage and bringing to your next outdoor adventure.

• Portable Air Compressor Sold Separate
• Hard Case for Compressor
• Carbon Fiber Pattern
• Tight Fit with Zipper
• Inner Mesh Pocket

PROGRAMMABLE PSI

This programmable, portable air compressor keeps your tires inflated and allows you to change your tire pressure on the fly. For motorcycles, mountain bikes, UTVs, ATVs and automobiles.

Handheld for simple user experience, featuring a Li-ion battery with cooling fan, ruggedized trachea, programmable PSI pressure settings, and an LED light. Can also be used as a USB phone charger.

2-year warranty.

IN THE BOX: This kit comes with the air compressor, USB-C cable for charging, flexible hose/trachea, Presta valve, sports needle for balls, English user guide and flexible black storage bag.

FIRST IMPRESSION: The pump is compact in size with a strong 5000 mAh capacity. Operation is simple, there are predefined values, but you can modify or choose the pressure manually. Hit the switch and when it reaches the desired air pressure it stops automatically, making pressure changes simple and fast for the user.

BEST USE: Great for inflating the wheels of motorcycles, UTVs, bicycles, cars, ATVs, basketballs, and other inflatable sporting equipment. Equipped with LED light to act as flashlight. There's even an option to charge phones from the air compressor. This is a must have daily carry for all vehicles.

ACCURACY: This air pump is accurate with great build quality. Simply dial up the desired air pressure and press start. The pump will automatically stop when it reaches the desired pressure.  Switch between pressure measurements (PSI, Bar, etc.).

PUMP SPEED: Rapidly fill motorcycle, UTV, car and bicycle tires on one charge. It takes about 5 minutes for a typical tire to inflate, depending on its size and starting pressure. Works from 2-150 PSI or 0.2-10.3 BAR. Inflate approximately 4 motorcycle tires from empty, or about 20 low-pressure Powersports tires to the proper level. This depends on the tires air pressure. Note: The air compressor battery fully charges in one hour.

HARD CASE ACCESSORY: The Portable Air Compressor comes with a flexible black storage bag. An accessory faux carbon fiber hard storage case is available for purchase separately, please see related products.

COMPATIBLE: Works with most types of tires and sporting equipment. The kit includes an American quick-connect trachea and a Presta adapter. The trachea is compatible with Schrader valves. The Presta adapter allows compatibility with Presta valves. There's also a sports needle included.

• Portable Air Compressor / Tire Inflator / Trail Pump
• 2-year Warranty
• 5000mAh Battery
• Programmable Pressure
• Rugged, Great for the Trail

SPECIFICATIONS:

• 100 Watt DC
• Trail Tech stators replace the OEM stator.
• Trail Tech stators increase power output significantly.
• Custom made by Trail Tech, not purchased from bike manufacturers and rewound.
• DC stators compatible with Trail Tech lighting systems of equal or lesser power
• Manufactured with superior craftsmanship and performance for serious riders

Fits:

Generic Conventional Forks

Physical Features

Wire Length 1450mm

Fits:

Generic Inverted Forks All Years

Physical Features

Wire Length 1450mm

(57%u201D)

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

Mounting: 9200-1000

Mount: RAM Ball Mount

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

10mm CHT Sensor: 7500-3010

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

10mm CHT Sensor: 7500-3012

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techsmost popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customized Waypoints

Set Waypoints as Destination

Personalize Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalize Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

7mm Fin Sensor: 7500-3004

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

8mm Fin Sensor: 7500-3008

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

25mm Water Sensor: 7500-3076

Magnet Kit: 704-01

Wheel Sensor: 704-06

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

19mm Water Sensor: 7500-3052

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

The Voyager Pro dock hard-mounts to the vehicle and allows quick removal of Voyager Pro.

Voyager Pro snaps on, is released by the large button on top, and can be locked using the Allen key.

Vehicle sensors plug into the back with waterproof white JST connectors.

The V2V antenna screws into the port on the back.

The black rubber guard is magnetic and protects the brass pins while Voyager Pro is removed.

Attaches to vehicles using the AMPs hole pattern. Compatible with Trail Tech mounting hardware and RAM brand mounts.

Included in Voyager Pro kits

Aluminium centre mount for 1-1/8'' handlebars.

Positions the gauge directly in the centre of the bars.

Works best on motorcycles where the bar clamp is split to expose the centre of the bar, especially KTM and Husqvarna.

Comes with four M4x12mm screws to attach the Voyager Pro dock.

Voyager GPS Unit Not Included.

Billet Aluminium Protector for Voyager Pro adds durability and protection for extreme riding conditions.

The Voyager Pro Protector is a precision billet aluminium case black anodizing for a clean look and designed to protect your Voyager Pro GPS unit from the elements and debris, while still allowing you to access to the SD card slot.

The Voyager Pro Protector gives nearly 360 degrees of protection insure this case will protect the Voyager Pro from front slapping branches as well as the screen from crashes.

Our complete kit includes an Aluminium Bar Mount and all the hardware necessary to assemble and mount to your Vehicle.

*Voyager Pro & Dock Not Included

Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.

Kickstand Length: 394mm

Weight: 907g

Bracket Material: Ultra-High Strength Chromoly Steel

Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand

Fitment: Custom Fit Per Motorcycle

Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.

Kickstand Length: 394mm

Weight: 907g

Bracket Material: Ultra-High Strength Chromoly Steel

Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand

Fitment: Custom Fit Per Motorcycle

Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.

Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand

OEM Replacement Leg ONLY

Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:

1. Increased Reach: With longer hoses, you'll be able to reach your tires even if they are further away from the compressor. This makes it easier to fill up your tires and get back on the road or trail.
2. Versatility: Longer hoses give you more flexibility when it comes to inflating different tires. Whether you need to inflate the tires on your ATV, truck, or trailer, our long hoses will be able to handle the job.
3. Durability: Our hoses are made with high-quality materials that are designed to withstand the wear and tear of off-roading. You can be confident that our hoses will hold up even in rugged terrain.
4. Convenience: Our long hoses come with quick-connect fittings that make it easy to attach them to your Trail Tech Portable Off-Road Air Compressor. This means you'll be able to set up and inflate your tires quickly and easily.

Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!

• Hose Length: 15" (480mm)
• Material: Rubber with braided nylon covering
• Valve Type on Hoses: One hose with Schrader screw, the other hose with lock-on air chuck for Schrader valves. Compatible with Presta adapter and ball needle in Trail Tech Portable Air Compressor kits.

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

The Trail Tech UNIVERSAL TEMP METER senses temperature on motorcycles, UTVs, ATVs, SNOW Machines, and other applications where a minimal footprint, watertight integrity, and durability are desired.  

The included radiator fin and cylinder head sensor assortment allow for the best option based on your application. After removing a sensor from the included array, they can be installed by pressing a radiator fin sensor between the fins of a radiator or replacing a spark plug crush washer with a cylinder head sensor. You can even capture ambient air temp by leaving the sensor wire exposed to the open air. This UNIVERSAL TEMP METER is primarily designed for motor vehicles use, but it is also well suited for DIY applications such as greenhouses, refrigerators, and computers.

If you need TEMP monitoring, then you need this UNIVERSAL TEMP METER!

DISPLAY:  Displays ºF/ºC temperature for whatever the copper sensor is attached to.  Monitor the max temperature reached and press the front button to see the time-of-day clock.

INCLUDED SENSOR CARD: Choice of 6 sensor heads included in the kit. Remove chosen head from the card, then fasten it to the sensor wire with a screw. It is possible to work with homemade DIY copper heads for various uses.

For best performance, use the provided copper sensors.

SENSOR CHOICES: Vehicle coolant sensor heads press into radiator fins (7, 8, and 10mm), or choose an engine ring sensor that replaces a head bolt or spark plug crush washer (10, 12, and 14mm).

BEST USE: Great for monitoring the temperature of UTVs, street, adventure, and off-road motorcycles.

Works great on other vehicles like farm equipment. Use this meter wherever you need to monitor the temperature on your application.

INSTALL: Comes with VHB tape for a quick head unit install or mechanically fastens with M4 (#6) bolts (not included).

BATTERY: The internal battery is NOT replaceable! Ultra-low power design of the product ensures a lifetime of 5+ years. Complete epoxy encapsulation provides the best weather and anti-vibration resistance for the harshest applications.